Philips Home Theater System LX9000R 25S User Manual

Quick use guide  
LX9000R  
0
4
1
!
5
!
9
2
6
3
7
8
@
@
!
#
!
General information  
Supplied accessories  
This Quick use guide gives a rough overview and helps  
to quickly start with basic steps. Please read the supplied  
user´s manual for detailed information.  
1 2 batteries for the remote control, type AA  
2 1 remote control  
3 1 blank DVD+RW disc  
4 1 SCART cable  
5 1 cinch audio cable  
6 1TV antenna cable  
7 1 FM antenna cable  
8 1 MW loop antenna  
9 1 AC mains cable  
0 7 speaker cables with colour coded ends  
! 2 front speakers and 2 rear speakers  
@ 2 subwoofers integrated in the speaker stands  
# 1 centre speaker  
1
 
Quick use guide  
LX9000R  
FM ANTENNA  
ANTENNA IN  
EXT IN  
AM ANTENNA  
O  
MAINS ~  
MW  
FM  
TV ANTENNA  
EXT  
2
LINE IN  
1
LINE IN  
2
LINE OUT  
DIGITAL OUT  
IN  
AUX I/0  
L
L
R
TV OUT  
TO TV I/0  
DIGITAL IN  
TV ANTENNA  
OPTICAL IN  
Make sure all  
other connections  
have been made  
before connecting  
the mains cable to  
AC MAINS ~ and  
to the wall socket.  
DIGITAL OUT  
DIGITAL IN  
TO TV  
EXT. IN  
TV OUT  
ANTENNA  
TO TV  
OPTICAL  
OUT  
Connections  
3 If necessary set theTV to the correct audio/video channel  
for the DVD recorder system. Such channels may be called  
AUX or AUXILIARY IN,AUDIO/VIDEO or A/V IN, EXT1,  
EXT2 or EXTERNAL IN, etc.These channels are often near  
channel 00.  
Scart inputs/outputs of your other appliances can be  
named:  
– TOTV/MONITOR, EURO-AV OUT,…  
– AUX, EXT, I/0, EURO-AV IN,…  
Note: If yourTV supports EasyLink, theTV and the DVD  
recorder system exchange information via the SCART cable.  
In this case, EasyLink loading data fromTV, please  
wait will appear on theTV. Some of the following settings will  
be done automatically then.  
Initial installation  
When you connect the DVD recorder system to the mains  
supply for the first time, you need to perform some basic  
settings. Please observe theTV screen and the display of  
the DVD recorder system.  
4
5
The menu Menu Language appears on theTV screen.  
1 Switch on yourTV.  
Press 3 or 4 to select the language in which the display  
messages should appear on theTV screen.Then press OK.  
2 Connect the supplied mains cable to AC MAINS ~ and to  
the wall socket. If the DVD recorder system is in demo  
mode, press 2 to cancel the demo mode.  
The menu Audio language appears.  
IS TV ON? is displayed on the DVD recorder system.  
Press 3 or 4 to select the language in which DVDs should  
preferably be played, if the language is available on the disc.  
Then press OK.  
3
 
Quick use guide  
LX9000R  
6
The menu Subtitle Language appears.  
10 Press SYSTEM MENU.  
CONTINUE WITH SPECIAL AUDIO SETTINGSis  
Press 3 or 4 to select the language in which subtitles  
should preferably be displayed, if subtitles in the language  
are available on the disc.Then press OK.  
scrolled on the DVD recorder system.  
Next, you will be asked  
– about the distances between the speakers and your  
preferred listening position and  
– to which socket you connected yourTV and other  
appliances.  
Note: Some DVDs may override your audio and subtitle  
language selection. In this case, you have to select the audio  
and subtitle language in the DVDs Disc Menu.  
7
The menu TV Shape appears.  
11 If you want to continue with these advanced settings:  
Press OK. For details, see “Advanced settings” on page 17 in  
the user´s manual.  
Press 3 or 4 to select the screen format.This setting will  
have an effect only with DVDs supporting different screen  
formats.  
4:3 letterbox: for a wide-screen picture (cinema  
format) on a conventional 4:3TV set with black borders  
at the top and bottom of the screen.  
4:3 panscan: for a full-height picture with cropped  
edges.  
If you do not want to continue, the standard settings  
below will be used for the speaker distances and the  
connections:  
Press 4 to select NO, then press OK to confirm.  
AUTOINSTALLis displayed.The DVD recorder system  
searches for available radio stations and stores them in its  
memory.  
16:9: for a wide-screenTV set.  
Then press OK.  
After the search INSTALLATION COMPLETEis  
scrolled and a radio station is played.The DVD recorder  
system is ready to play.  
8
9
The menu Country appears.  
Press 3 or 4 to select the country where the  
DVD recorder system is used. If your country does not  
appear, select Other.Then press OK.  
Standard settings for the speaker distances and  
the connected appliances  
To change these settings later on, see “When adding  
appliances or changing the connections of appliances” and  
“When changing the speaker setup” in the user´s manual.  
If you have connected the antenna - press OK  
appears.  
If you connected the DVD recorder system to a  
TV antenna or a cableTV system, press OK.  
If not, connect the antenna as described in “Connecting the  
TV antenna”, then press OK.  
Autoinstall appears and the automatic search for  
TV channels starts.This may take several minutes.As soon  
as the search is complete, Autoinstall complete  
appears.  
3 m  
3 m  
3 m  
1.5 m  
1.5 m  
appliance  
TV  
satellite receiver  
VCR (video recorder)  
game console  
CD player  
is connected to  
EXT 1TOTV I/O  
EXT 2 AUX I/O  
EXT 2 AUX I/O  
EXT 2 AUX I/O  
DIGITAL IN  
CD recorder  
tape deck  
LINE IN 1  
LINE IN 2  
Note:The satellite receiver,VCR and game console are  
connected in a “chain”. See illustration on the page to the left.  
4
 
Quick use guide  
LX9000R  
Discs for playback and recording  
Playback  
DVD+R  
1 Press OPEN/CLOSE / on the set to open the drawer and  
can be recorded once and played  
on standard DVD players and  
DVD recorders, if finalised.  
insert a disc (printed side up) in the tray.  
2 Press OPEN/CLOSE / on the set again. If necessary, press  
PLAY/PAUSEÉÅ to start playback.  
DVD+RW  
0
0
To interrupt playback, press PLAY/PAUSEÉÅ.  
can be recorded, erased and  
re-recorded many times and played on  
DVD+RW compatible DVD players  
and DVD recorders if finalised.  
To resume playback, press PLAY/PAUSEÉÅ again.  
3 To stop playback press STOP.  
Selecting a source  
G
Turn SOURCE on the DVD recorder system or keep a  
source key on the remote control pressed for 1 second to  
select either:  
Discs for playback only  
Discs with the following logos can be played:  
the disc in the DVD recorder system  
o
MONITOR: the internalTV tuner of the DVD  
recorder system (only selectable by pressing  
DVD/MON on the remote control)  
l
e
m
n
i
TV: theTV  
CAM1: a camcorder connected to CAM 1  
CAM2: a camcorder connected to CAM 2  
SAT: a connected satellite receiver  
VCR: a connectedVCR (video recorder)  
GAME: a connected game console  
the radio tuner of the DVD recorder system  
j
r
f
TAPE: a connected tape deck or similar audio  
k
recording appliance  
CDR: a connected CD recorder  
p
q
CD: a connected CD player/changer  
The sound of the source is played on the DVD recorder  
system.  
Note: If SOURCE NOT AVAILABLEis scrolled please read  
“When adding appliances or changing the connections of  
appliances” in the user´s manual.  
5
 
Quick use guide  
LX9000R  
Selecting a recording mode  
Recording from other appliances  
G
Before recording, press REC MODE repeatedly to select  
the desired recording mode:  
1 Switch yourTV set on. If necessary set theTV to the  
correct audio/video channel for the DVD recorder system.  
Such channels may be called AUX or AUXILIARY IN,  
AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN,  
etc.These channels are often near channel 00.  
mode  
HQ  
SP  
SP+  
LP  
quality  
better than DVD  
DVD  
better than S-VHS  
S-VHS  
better thanVHS  
VHS  
recording time  
60 minutes  
120 minutes  
150 minutes  
180 minutes  
240 minutes  
360 minutes  
2 Load a disc on which you want to record in the tray.  
3 Press on the remote control either:  
EP  
EP+  
SAT: to record from a connected satellite receiver.  
CAM1/2: to record from a connected video camera. Press  
the button repeatedly to toggle between camera 1  
(analogue input) and camera 2 (digital i.Link input).  
VCR/GAME: to record from a connected video cassette  
recorder or a game console. Press the button repeatedly to  
toggle between video cassette recorder and game console.  
Recording aTV programme with  
safe record  
1 Switch yourTV set on. If necessary set theTV to the  
correct audio/video channel for the DVD recorder system.  
Such channels may be called AUX or AUXILIARY IN,  
AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN,  
etc.These channels are often near channel 00.  
4 Press RECORD on the DVD recorder system or REC/OTR  
on the remote control to start recording.  
Note: Recordings on a DVD+RW disc are started from the  
current position. From there on, earlier recordings may be  
overwritten without notice, unless the disc is write protected.  
2 Load a DVD+R disc or DVD+RW disc on which you want  
to record in the tray.  
3 Press DVD/MON on the remote control as often as  
0
0
To interrupt recording press PLAY/PAUSEÉÅ.  
necessary to see the currently selectedTV channel.  
To resume recording press PLAY/PAUSEÉÅ again.  
4 Press CH+ or CH- on the remote control as often as  
necessary to select the desiredTV channel (programme  
number) from which you wish to record.  
5 Press STOP 9 to stop recording.  
5 Keep REC/OTR on the remote control pressed until  
SAFE RECOis displayed.  
6 Press STOP 9 to stop recording.  
3103 306 1952.1  
VieChr0317  
 

Peavey Air Cleaner 23XO User Manual
Philips Headphones SHB7000 User Manual
Philips Home Theater System SBC RU950 User Manual
Philips Satellite Radio EXP2581 User Manual
Polaris Offroad Vehicle 450 MXR LE User Manual
Polycom Musical Table V2IU 4350 User Manual
Polycom Server DOC2558B User Manual
Porter Cable Router 7538 User Manual
Precisionaire Air Cleaner ASHRAE Series User Manual
ProForm Home Gym 831237440 User Manual